홈으로고객센터로그인   회원가입오시는길
통합검색
제품동영상



HOME > 제품소개 > 확장 및 주변장치
CAN 16-Out I/O Module (P317)
The Trio CAN16 Output module provides 256 distributed output channels at 24Vdc level. All points are short-circuit proof and completely isolated from the CANbus. P317 modules may be mixed on the same bus, with other types in the Trio CAN I/O range.
CAN 8-Relay Module (P327)
The Trio CAN8 Relay module provides 128 distributed low power relay channels at up to 30Vdc or 49Vac. All output points are Volt-free contacts and are completely isolated from the CANbus. P327 modules may be mixed on the same bus, with other types in the Trio CAN I/O range.
CAN16 I/O Module (P319)
The Trio CAN16 Input/Output module provides 256 distributed bi-directional input/output channels at 24Vdc level. All input points are high level, (24V = ON) all outputs are short-circuit proof and the I/O is completely isolated from the CANbus.
CAN 16-In I/O Module (P318)
The Trio CAN16 Input module provides 256 distributed input channels at 24Vdc level. All input points are high level (24V in = ON) and completely isolated from the CANbus.
CAN 8-In / 4-Out I/O Module (P326)
The CAN Analogue I/O module provides a compact DIN rail mounted analogue input/output capability for Trio Motion Coordinators. Each module provides 8 channels of 12-bit (+/-10V) analogue inputs and 4 channels of 12-bit (+/-10V) analogue outputs.
CAN 16 Input/Output module
Blanking Module (P878)
Used to ensure the system is "tied" together mechanically. There is no communication bus connection, but the P878 is required for the earth connection.
Anybus-CC Module (P875)
This module adds support for the Anybus CompactCom device modules.
FlexAxis Interface (P874, P879, P881)
For use with Stepper, Analogue Servo & Piezo motors. The Flexible axis interface is available in 4 axes (P879) and 8 axes (P874) versions.
Ethercat Interface (P876)
For use with and EtherCAT based drive products. EtherCAT is the open real-time Ethernet network originally developed by Beckhoff.
SLM Interface (P873)
For use with drives supporting Control Techniques SLM protocol. Each module supports 6 axes which can be individual drives or a single drive using the CT Multiax concept.
Micro SD Card Adaptor
Allows the controller to read and write files as a Flash drive using the FAT32 file system.
MC224 Axis Expander (P301)
MC224 axis expander provides an additional 4 axis daughter board slots to an MC224. Up to 3 axis expanders can be used per MC224 master. MC224 and expanders must be sited next to each other and connected using the appropriate Trio System Ribbon. MC224는 4축 모션컨트롤러 이면 추가로 4축을 더 사용을 할수 있다. Note: P301 accepts any axis daughter board, but NOT digital drive or fieldbus daughter boards.
Daughter Board Adaptor (P399)
Required to fit any daughter board to the MC206X. UL Approved
Additional Reference Encoder Input (P393)
Serial to Fibre Optic Adaptor (P435)
Fibre optic adaptor to convert TTL port on MC224, MC206X, Euro205x and Euro209 series Motion Coordinators to Trio fibre optic network.
RS232 serial Cable (P350)
Provides 4 +/-10V, 16 Bit outputs. Includes 4 x 0-10V analogue inputs 12 Bit.
Additional Servo Axis (P390)
2 Way System Cable (P355)
Connects MC224 (P170) to 1 MC224 Axis Expander (P301).
Additional Servo Axis (P406)
  1 / 2 / 3 / 4 /  
(주)서보엠텍
주소서울특별시 금천구 가산동 371-59 신한이노플렉스II 804호    전화02-2068-0886    팩스02-2068-9752
대표명임영완    회사명(주)서보엠텍    사업자등록번호113-86-19930    이메일ywoun@paran.com
Copyright (c) SERVO MTECH. All Rights Reserved.